Print Production - Flexography

Flexography is the major process used to print packaging materials. Flexography is used to print corrugated containers, folding cartons, multiwall sacks, paper sacks, plastic bags, milk and beverage cartons, disposable cups and containers, labels, adhesive tapes, envelopes, newspapers, and wrappers (candy and food). 

Flexographic presses are capable of producing good quality impressions on many different substrates and is the least expensive and simplest of the printing processes used for decorating and packaging printing. The use of flexographic printing presses is on the rise. There are two primary reasons for this: 1) it is a relatively simple operation; and 2) it is easily adapted to the use of water-based inks. The widespread use of water-based inks in flexographic printing means a large reduction in VOC emission compared to the heatset web or gravure printing processes.

Publication flexography is used mainly in the production of newspaper, comics, directories, newspaper inserts, and catalogs. Packaging flexography is used for the production of folding cartons, labels, and packaging materials. Large quantities of inks are used during normal runs on flexographic presses; however, some printers are able to recycle a majority of their spent inks and wash waters. Major chemicals used in flexography include platemaking solution, water and solvent based inks, and blanket/roller cleaning solvents.

Flexography is a form of rotary web letterpress, combining features of both letterpress and rotogravure printing, using relief plates comprised of flexible rubber or photopolymer plates and fast drying, low viscosity solvent, water-based or UV curable inks fed from an "anilox" or two roller inking system. The flexible (rubber or photopolymer) plates are mounted onto the printing cylinder with double-faced adhesive. Plates are sometimes backed with thin metal sheets and attached to the cylinder with fastening straps for close register or ink alignment. This adds additional cost to the plate and requires more makeready time, but when quality printing is critical this type of plate can make the difference.

The major unit operations in a flexographic printing operation are:

• Image preparation
• Platemaking
• Printing
• Finishing

Below is a process flow diagram for flexographic printing:

Image Preparation

Image preparation begins with camera-ready (mechanical) art/copy or electronically produced art supplied by the customer. Images are captured for printing by camera, scanner or computer. Components of the image are manually assembled and positioned in a printing flat when a camera is used. This process is called stripping. When art/copy is scanned or digitally captured the image is assembled by the computer with special software. A simple proof (brown print) is prepared to check for position and accuracy. When color is involved, a color proof is submitted to the customer for approval.

Flexographic Plate Making

Flexographic and letterpress plates are made using the same basic technologies utilizing a relief type plate. Both technologies employ plates with raised images (relief) and only the raised images come in contact with the substrate during printing. Flexographic plates are made of a flexible material, such as plastic, rubber or UV sensitive polymer (photopolymer), so that it can be attached to a roller or cylinder for ink application. There are three primary methods of making flexographic plates; photomechanical, photochemical and laser engraved plates.

Flexographic Printing Presses

The five types of printing presses used for flexographic printing are the stack type, central impression cylinder (CIC), in-line, newspaper unit, and dedicated 4-, 5-, or 6-color unit commercial publication flexographic presses. All five types employ a plate cylinder, a metering cylinder known as the anilox roll that applies ink to the plate, and an ink pan. Some presses use a third roller as a fountain roller and, in some cases, a doctor blade for improved ink distribution. 

Flexographic Inks

Flexographic inks are very similar to packaging gravure printing inks in that they are fast drying and have a low viscosity. The inks are formulated to lie on the surface of nonabsorbent substrates and solidify when solvents are removed. Solvents are removed with heat, unless U.V. curable inks are used. 

Finishing

After printing, the substrate may run through a number of operations to be "finished" and ready for shipment to the customer. Finishing may include operations such as coating, cutting, folding and binding.